주요 콘텐츠로 건너뛰기

소개

Disassembly guide for Cisco Aironet 1242ag Access Point

부품

지정된 부품이 없습니다.

  1. The equipment cover is held by 4 screws. The equipment cover is held by 4 screws.
    • The equipment cover is held by 4 screws.

  2. Once the 4 screws are removed, push to the side to remove the cover.
    • Once the 4 screws are removed, push to the side to remove the cover.

  3. The card is attached to the bottom plate by 4 screws Before removing the logic board, disconnect the antenna cables in both parts of the device. There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.
    • The card is attached to the bottom plate by 4 screws

    • Before removing the logic board, disconnect the antenna cables in both parts of the device.

    • There is a total of 4 cables. Use a tweezer or a spudger to disconnect them.

  4. Write the wisdom here. Write the wisdom here. Write the wisdom here.
    • Write the wisdom here.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

다음 번역가들에게 특별히 감사 드립니다:

100%

이 번역자 분들은 저희가 세상을 수리하는데 동참해 주시는 분입니다! 기여하시겠습니까?
번역 시작하기 ›

첨부 문서

Eneider Colina

회원 가입일: 2013년 09월 20일

1,444 평판

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 13

전체 시간: 344