기기를 수리하세요 커뮤니티 상점

Classen Sod Cutter HSC18AHD 2018 Blade Replacement

소개

Follow this guide to replace the blade on a 2018 Classen Sod Cutter model HSC18AHD.

필요한 것

  1. 주의: 1-4 단계들은 진행 중으로 표시된 안내서에서 제공되었습니다.

    Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Safety precautions: 1 단계, 이미지 1/2 Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Safety precautions: 1 단계, 이미지 2/2

    • Make sure the engine is off and cool to the touch before you proceed.

    편집

  2. Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 2 단계, 이미지 1/1

    • Place wheel chocks against the roller and rear wheel to prevent the machine from moving.

    편집

  3. Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 3 단계, 이미지 1/2 Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 3 단계, 이미지 2/2

    • Flip the gas shutoff switch next to the motor to the left into the off position.

    편집

  5. Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 4 단계, 이미지 1/2 Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 4 단계, 이미지 2/2

    • Grab the plastic housing at the end of the spark plug wire.

    • Pull firmly to disconnect the wire from the spark plug.

    편집

  6. Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Unbolt the cutter blade: 5 단계, 이미지 1/1

    • Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the left side of the machine.

    • You may need to use a 1/2 inch wrench in combination with the socket wrench to hold the nuts in place.

    편집

  7. Classen Sod Cutter HSC18AHD 2018 Blade Replacement: 6 단계, 이미지 1/1

    • Use a 1/2 inch socket to remove the three bolts securing the cutter blade on the right side of the machine.

    • You may need to use a 1/2 inch wrench in combination with the socket wrench to hold the nuts in place.

    편집

  8. Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Remove the cutter blade: 7 단계, 이미지 1/3 Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Remove the cutter blade: 7 단계, 이미지 2/3 Classen Sod Cutter HSC18AHD 2018 Blade Replacement, Remove the cutter blade: 7 단계, 이미지 3/3

    • Slide the cutter blade out from under the machine to remove it.

    • Do not handle the blade from the cutting edge.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

Sam Omiotek

회원 가입일: 02/25/19

72,562 평판

안내서 288개 작성하였습니다

배지: 35

배지 +32개 더

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 8

전체 시간: 381