주요 콘텐츠로 건너뛰기

소개

Whether your knobs are broken or you want to put a decorative sticker on your front panel, sometimes you need to get the knobs off of your radio. This guide will instruct you on how to use plastic opening tools to safely remove the knobs.

부품

지정된 부품이 없습니다.

  1. Turn the power switch, the leftmost knob, counterclockwise to off. Turn the power switch, the leftmost knob, counterclockwise to off.
    • Turn the power switch, the leftmost knob, counterclockwise to off.

  2. Turn the device around and firmly pull the power cable plug to remove it from the radio. Turn the device around and firmly pull the power cable plug to remove it from the radio.
    • Turn the device around and firmly pull the power cable plug to remove it from the radio.

  3. Unscrew the cap counterclockwise on the microphone plug to disconnect the cable. Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.
    • Unscrew the cap counterclockwise on the microphone plug to disconnect the cable.

  4. 안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기

    안드로이드 수리 키트

    A new screen or battery is one kit away.

    지금 장보기
  5. Gently unplug the microphone plug.
    • Gently unplug the microphone plug.

  6. Gently turn the middle four knobs counter-clockwise until they no longer move.
    • Gently turn the middle four knobs counter-clockwise until they no longer move.

    • The middle four knobs are held in place by friction and do not have a way to keep them in the correct position. When reassembling the middle four knobs, make sure to line up the mark on the knob with the left-most mark on the front panel.

  7. Insert two plastic opening tools behind the tuning knob. With some force, pry the knob off of the radio.
    • Insert two plastic opening tools behind the tuning knob.

    • With some force, pry the knob off of the radio.

    • Two opening tools are needed so that you don't break the knob or connector by applying uneven force.

  8. Repeat the above procedure with the remaining knobs. The final knob will have a power knob on the end of it. When reassembling, put the power knob on last. The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.
    • Repeat the above procedure with the remaining knobs.

    • The final knob will have a power knob on the end of it. When reassembling, put the power knob on last.

결론

To reassemble your device, align the buttons and push them on.

다른 한 분이 해당 안내서를 완성하였습니다.

Matt Williams

회원 가입일: 2013년 10월 20일

133 평판

안내서 1개 작성함

Cal Poly, Team 11-37, Amido Fall 2013 Cal Poly, Team 11-37, Amido Fall 2013 회원

CPSU-AMIDO-F13S11G37

4 회원들

안내서 9개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 10

지난 30일: 34

전체 시간: 3,352