Cobra MR HH350 FLT Screen Replacement - iFixit 수리 안내서

소개

Here is your quick guide to removing the screen to your Cobra MR HH350 FLT radio.

필요한 것

1 단계 Battery

Cobra MR HH350 FLT Screen Replacement, Battery: 1 단계, 이미지 1/1

Remove the 11mm screw at the bottom of the radio with a #4 flathead screwdriver.

2 단계

Cobra MR HH350 FLT Screen Replacement: 2 단계, 이미지 1/1

Remove the battery from the radio.

3 단계 Motherboard

Cobra MR HH350 FLT Screen Replacement, Motherboard: 3 단계, 이미지 1/2

Cobra MR HH350 FLT Screen Replacement, Motherboard: 3 단계, 이미지 2/2

이 단계에 사용된 도구:

Tweezers

$4.99

구매

Remove the 6 rubber stoppers using tweezers to reveal screws.

4 단계

Cobra MR HH350 FLT Screen Replacement: 4 단계, 이미지 1/1

Remove the 6 10mm screws that were behind the rubber stoppers with a #0 Phillips screwdriver.

5 단계

Cobra MR HH350 FLT Screen Replacement: 5 단계, 이미지 1/1

Remove the cover to expose the motherboard.
Pull off the power nob at the top of the radio.

6 단계

Cobra MR HH350 FLT Screen Replacement: 6 단계, 이미지 1/2

Cobra MR HH350 FLT Screen Replacement: 6 단계, 이미지 2/2

Remove the 2 6mm screws on the motherboard with a #0 Phillips screwdriver.

7 단계

Cobra MR HH350 FLT Screen Replacement: 7 단계, 이미지 1/1

Remove the motherboard.

8 단계 Screen

Cobra MR HH350 FLT Screen Replacement, Screen: 8 단계, 이미지 1/2

Cobra MR HH350 FLT Screen Replacement, Screen: 8 단계, 이미지 2/2

Now that the motherboard is gone, the back of the screen is now accessible.
To remove the screen, you need to use the Jimmy in the IFIXIT tool kit. It may take some time due to the epoxy used to keep water from entering the device.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Rajahn Lewis

회원 가입일: 09/15/23

145 평판

안내서 2개 작성하였습니다

팀

University of New Orleans, Team 4-4, McDonald Fall 2023 University of New Orleans, Team 4-4, McDonald Fall 2023 회원

UNO-MCDONALD-F23S4G4

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 6

전체 시간: 55