Cobra SPX 5300 Buttonboard Disassembly - iFixit 수리 안내서

소개

This guide will walk you through removing the buttonboard. Removing the buttonboard will give you access to the buttons and the display screen.

필요한 것

1 단계 Windshield Bracket Mount

Cobra SPX 5300 Buttonboard Disassembly, Windshield Bracket Mount: 1 단계, 이미지 1/2

Cobra SPX 5300 Buttonboard Disassembly, Windshield Bracket Mount: 1 단계, 이미지 2/2

Remove the four 9.5 mm Phillips #0 screws from the back of the device.

2 단계

Cobra SPX 5300 Buttonboard Disassembly: 2 단계, 이미지 1/2

Cobra SPX 5300 Buttonboard Disassembly: 2 단계, 이미지 2/2

Pull the black plastic back case off of the device.

3 단계

Cobra SPX 5300 Buttonboard Disassembly: 3 단계, 이미지 1/1

Lift up the motherboard and lay it flat next to the device.
Be careful not to sever the wires. The buttonboard is connected to the motherboard by the wires.

4 단계

Cobra SPX 5300 Buttonboard Disassembly: 4 단계, 이미지 1/1

Remove the windshield bracket mount.

5 단계 Buttonboard

Cobra SPX 5300 Buttonboard Disassembly, Buttonboard: 5 단계, 이미지 1/1

Remove the four 4.8 mm Phillips #00 screws from the buttonboard.

6 단계

Cobra SPX 5300 Buttonboard Disassembly: 6 단계, 이미지 1/1

Lift buttonboard to expose silver button plate.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Megan McDonough

회원 가입일: 09/25/15

113 평판

안내서 1개 작성함

+1개 배지 추가

팀

University of Tampa, Team 1-2, Whiteside Fall 2015 University of Tampa, Team 1-2, Whiteside Fall 2015 회원

UT-WHITESIDE-F15S1G2

4 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 8

전체 시간: 311