기기를 수리하세요 커뮤니티 상점

Coby Kyros MID9742 Camera Module Replacement

필요한 것

  1. Coby Kyros MID9742 Camera Module Replacement, Outer Casing: 1 단계, 이미지 1/1

    • Use a spudger to remove the four rubber screw covers from the four back corners of the tablet.

    번역하기

  2. Coby Kyros MID9742 Camera Module Replacement: 2 단계, 이미지 1/1

    • Place the PH00 screwdriver and use it to remove the four 0.5 cm screws from each corner of the tablet.

    번역하기

  4. Coby Kyros MID9742 Camera Module Replacement: 3 단계, 이미지 1/1

    • Place a metal spudger tool in between the front and back panels of the tablet and begin to pry the base from the front panel by moving the metal tool around the perimeter of the tablet.

    • Note that clicking noises will be heard during this process, the panels are assembled well so it may take some force to separate the two panels.

    • Use caution while prying, do not stick the metal spudger in too far as it may damage internal components

    번역하기

  5. Coby Kyros MID9742 Camera Module Replacement, Camera Module: 4 단계, 이미지 1/1

    • Remove the two ribbon cables attached to the logic board.

    번역하기

  6. Coby Kyros MID9742 Camera Module Replacement: 5 단계, 이미지 1/1

    • Remove the tape covering the ribbon cables and remove the camera module.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Jake

회원 가입일: 03/11/15

158 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

Colorado Springs, Team 5-3, Panko Spring 2015 Colorado Springs, Team 5-3, Panko Spring 2015 회원

UCCS-PANKO-S15S5G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 189