이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.
소개
The purpose of this guide is to communicate steps on how to replace or repair the cartridge reader on a ColecoVision.
필요한 것
-
-
Flip the console upside down and remove the eight 15mm Phillips #1 screws.
-
-
-
-
Desolder the sides of the cartridge reader using the soldering iron and desolder pump.
-
Patiently wait for the cartridge reader to cool down after being desoldered.
-
Carefully lift up the cartridge reader. A plastic spudger might be helpful in order to easily remove the cartridge reader.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.