주요 콘텐츠로 건너뛰기

ColecoVision Power Switch Replacement

필요한 것

  1. ColecoVision Power Switch Replacement, Power Switch: 1 단계, 이미지 1/1
    • Flip the ColecoVision over with the pegs facing the ceiling.

    • Remove the eight 15mm screws holding the bottom of the ColecoVision in place using the Phillips #1 screwdriver.

  2. ColecoVision Power Switch Replacement: 2 단계, 이미지 1/2 ColecoVision Power Switch Replacement: 2 단계, 이미지 2/2
    • Carefully remove the bottom of the ColecoVision out of the top.

    • I would recommend running a metal spudger along the rim of the case to remove the bottom.

  3. ColecoVision Power Switch Replacement: 3 단계, 이미지 1/1
    • Remove the two 15 mm screws holding the casing in place using the Phillips #1 screwdriver.

  4. ColecoVision Power Switch Replacement: 4 단계, 이미지 1/2 ColecoVision Power Switch Replacement: 4 단계, 이미지 2/2
    • Using a Phillips #1 screwdriver, remove the two 15mm screws on the motherboard.

    • Pull the entire motherboard towards the back of the system and carefully lift the entire motherboard.

  5. ColecoVision Power Switch Replacement: 5 단계, 이미지 1/1
    • Flip the motherboard over.

    • Using a soldering iron, carefully desolder the power switch from the motherboard.

    • Refer to this soldering technique guide for reference.

  6. ColecoVision Power Switch Replacement: 6 단계, 이미지 1/1
    • Wait for power switch to cool down.

    • Turn the motherboard over upright.

    • Carefully lift up the power switch to completely remove it from the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Bobby

회원 가입일: 10/17/18

380 평판

안내서 2개 작성하였습니다

UW Tacoma, Team S1-G2, Rose Fall 2018 UW Tacoma, Team S1-G2, Rose Fall 2018 회원

UWT-ROSE-F18S1G2

4 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 20

전체 시간: 1,661