Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement - iFixit 수리 안내서

소개

This tutorial shows you the change of only one carbon, to change the second you just have to follow the same method.

필요한 것

1 단계 Unplug

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement, Unplug: 1 단계, 이미지 1/1

Before you begin, remember to disconnect the mains plug.

2 단계

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 2 단계, 이미지 1/2

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 2 단계, 이미지 2/2

Unscrew the screws of the hull to open it.

3 단계

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 3 단계, 이미지 1/3

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 3 단계, 이미지 2/3

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 3 단계, 이미지 3/3

Using a screwdriver, unscrew the place where the carbon is located in order to extract it.

4 단계

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 4 단계, 이미지 1/1

Take the carbon out of the carbon holder.

5 단계

With pliers disconnect the carbon.

6 단계

Then reconnect the new carbon.

7 단계

Replace it in the carbon holder.

8 단계

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 8 단계, 이미지 1/1

And finally put it back in its housing.

9 단계

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 9 단계, 이미지 1/2

Corded Reciprocating Saw Dexter 900W - 900RPS Carbon Replacement: 9 단계, 이미지 2/2

Before closing, check that no cable is blocked and that each part is in its place.
Then retighten the hull screws.

결론

To reassemble perform steps in reverse.

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

HelloMacOS

HelloMacOS님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Céline Chemineau

회원 가입일: 01/29/20

16,581 평판

안내서 95개 작성하였습니다

배지 +9개 더

팀

Leroy Merlin Leroy Merlin 회원

Community

36 회원들

안내서 239개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 13

전체 시간: 360