기기를 수리하세요 커뮤니티 상점

Corsair Katar Scroll Wheel Sensor

소개

If the scroll wheel sensor on your Corsair Katar mouse is broken, this guide will show you how to replace it.

필요한 것

  1. Corsair Katar Scroll Wheel Sensor, Corsair Katar Disassembly: 1 단계, 이미지 1/2 Corsair Katar Scroll Wheel Sensor, Corsair Katar Disassembly: 1 단계, 이미지 2/2

    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

    편집

  2. Corsair Katar Scroll Wheel Sensor: 2 단계, 이미지 1/1

    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

    편집

  3. Corsair Katar Scroll Wheel Sensor: 3 단계, 이미지 1/2 Corsair Katar Scroll Wheel Sensor: 3 단계, 이미지 2/2

    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

    편집

  5. Corsair Katar Scroll Wheel Sensor: 4 단계, 이미지 1/1

    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

    편집

  6. Corsair Katar Scroll Wheel Sensor, Scroll Wheel: 5 단계, 이미지 1/2 Corsair Katar Scroll Wheel Sensor, Scroll Wheel: 5 단계, 이미지 2/2

    • Use the JIS 0 screwdriver to remove the two 5mm screws on the motherboard.

    편집

  7. Corsair Katar Scroll Wheel Sensor: 6 단계, 이미지 1/1

    • Use the plastic opening tool to pry the white cable jack away from the motherboard.

    • Lift the motherboard away from the bottom of the mouse.

    편집

  8. Corsair Katar Scroll Wheel Sensor: 7 단계, 이미지 1/1

    • Push the scroll wheel to the right side of the motherboard as shown, then pull it away from the board to remove.

    편집

  9. Corsair Katar Scroll Wheel Sensor, Scroll Wheel Sensor: 8 단계, 이미지 1/2 Corsair Katar Scroll Wheel Sensor, Scroll Wheel Sensor: 8 단계, 이미지 2/2

    • Flip the motherboard over and remove the clear plastic cover from the bottom of the board.

    편집

  10. Corsair Katar Scroll Wheel Sensor: 9 단계, 이미지 1/2 Corsair Katar Scroll Wheel Sensor: 9 단계, 이미지 2/2

    • Desolder the 5 connecting pins to remove the scroll wheel sensor from the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Margaret Loughren

회원 가입일: 07/12/18

594 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

UW Tacoma, Team S1-G3, Cardinal Summer 2018 UW Tacoma, Team S1-G3, Cardinal Summer 2018 회원

UWT-CARDINAL-SU18S1G3

3 회원들

안내서 12개 작성하였습니다

댓글 2개

bonsoir moi ma molette tourne dans le vide rien ne accroche merci

Tara - 답글

Do I need new pads when I take out the old ones or will the same one stick?

Ishaan Patel - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 16

전체 시간: 1,496