기기를 수리하세요 커뮤니티 상점

Corsair Katar USB Cable Replacement

소개

If the attached USB cable on your Corsair Katar mouse is not working due to damage or exposed wires, this guide will show how to replace it.

필요한 것

  1. Corsair Katar USB Cable Replacement, Corsair Katar Disassembly: 1 단계, 이미지 1/2 Corsair Katar USB Cable Replacement, Corsair Katar Disassembly: 1 단계, 이미지 2/2

    • Unplug your mouse before starting.

    • Flip the mouse over so the bottom is facing up.

    편집

  2. Corsair Katar USB Cable Replacement: 2 단계, 이미지 1/1

    • Remove the three skates on the bottom of the mouse using the plastic opening tools.

    • Skates will be very sticky.

    편집

  3. Corsair Katar USB Cable Replacement: 3 단계, 이미지 1/2 Corsair Katar USB Cable Replacement: 3 단계, 이미지 2/2

    • Use the JIS 0 screwdriver to remove the four 5 mm screws on the bottom of the mouse.

    편집

  5. Corsair Katar USB Cable Replacement: 4 단계, 이미지 1/1

    • Detach the bottom of the mouse from the upper shell.

    • Remove the shell slowly so as not to damage the white DPI cable inside the mouse.

    • Use the plastic opening tool to detach the white DPI sensor cable from its port.

    • Alternatively, you can use your hand to remove the DPI sensor cable by wiggling it out of the port.

    편집

  6. Corsair Katar USB Cable Replacement, USB Cable: 5 단계, 이미지 1/2 Corsair Katar USB Cable Replacement, USB Cable: 5 단계, 이미지 2/2

    • Use the JIS 0 screwdriver to remove the two 5mm screws on the motherboard.

    편집

  7. Corsair Katar USB Cable Replacement: 6 단계, 이미지 1/1

    • Use the plastic opening tool to pry the white cable jack away from the motherboard.

    • Lift the motherboard away from the bottom of the mouse.

    편집

  8. Corsair Katar USB Cable Replacement: 7 단계, 이미지 1/2 Corsair Katar USB Cable Replacement: 7 단계, 이미지 2/2

    • Use the JIS 0 screwdriver to remove the 5mm screw attached to the USB wire housing.

    • Lift the USB wire away from the shell of the mouse.

    • When reassembling the device, run the USB wire through the channel on the bottom of the shell to keep it in place.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Margaret Loughren

회원 가입일: 07/12/18

594 평판

안내서 5개 작성하였습니다

배지: 10

배지 +7개 더

팀

UW Tacoma, Team S1-G3, Cardinal Summer 2018 UW Tacoma, Team S1-G3, Cardinal Summer 2018 회원

UWT-CARDINAL-SU18S1G3

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 12

전체 시간: 1,277