기기를 수리하세요 커뮤니티 상점

Craftsman Model 315.10721 Cord Replacement

소개

WARNING: Once the power cord has been identified as the item that needs replacement, make sure that the device is disconnected from any power supply.

필요한 것

  1. Craftsman Model 315.10721 Cord Replacement, Cord: 1 단계, 이미지 1/1

    • Remove the two 1" Phillips screws using a #1 Phillips screwdriver.

    • Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.

    • Once the five screws are removed, lift the handle cover from the saw.

    • Each screw has a corresponding nut on the opposite side of the power saw

    편집

  3. Craftsman Model 315.10721 Cord Replacement: 2 단계, 이미지 1/1

    • Remove the 1/2" Phillips screw that is securing the switch using a Phillips #1 screwdriver.

    편집

  4. Craftsman Model 315.10721 Cord Replacement: 3 단계, 이미지 1/2 Craftsman Model 315.10721 Cord Replacement: 3 단계, 이미지 2/2

    • Using a Phillips #00 screwdriver or a small diameter screwdriver, gently insert it into the leads. When the screwdriver is inserted into the lead, it will release the wire.

    • The leads are where the black and white wires from the power cord are plugged in.

    • Release both the black and white wires and gently pull them from the leads.

    • To install the new cord, insert the wires of the new cord in the same way that they were removed.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Riley Hilliker

회원 가입일: 10/14/14

557 평판

안내서 5개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 4-47, Amido Fall 2014 Cal Poly, Team 4-47, Amido Fall 2014 회원

CPSU-AMIDO-F14S4G47

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 12

전체 시간: 482