소개
The switch is an essential piece of the Craftsman Model 315.10721. Even if the motor and inner hardware is working, if the switch is broken, the saw will not start.
필요한 것
-
-
Remove the two 1" Phillips screws using a #1 Phillips screwdriver.
-
Remove the three 1/2" Phillips screws using a #1 Phillips screwdriver.
-
Once the five screws are removed, lift the handle cover from the saw.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.