소개

This repair/ replacement may be needed if the lettering on the knobs have worn off or if the knobs have been snapped off.

부품

부품은 필요하지 않습니다.

  1. Ensure device is turned unplugged, cooled down and clean before attempting any replacements. Remove cooking plates by pushing in the tabs on each side of the plate at the same time.
    • Ensure device is turned unplugged, cooled down and clean before attempting any replacements.

    • Remove cooking plates by pushing in the tabs on each side of the plate at the same time.

  2. Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.
    • Remove the six 5.5mm Phillips #2 screws that secure the bottom heating coil to the device.

  3. Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.
    • Remove the four 30 mm Phillips #2 screws that secure the bottom heating apparatus.

  4. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  5. Remove the single 5.5 mm Phillips #2 screw next to center black button.
    • Remove the single 5.5 mm Phillips #2 screw next to center black button.

    • After removing the center screw the metal plate should be free to remove.

  6. Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out. Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.
    • Lift the bottom heating apparatus up and remove large black center piece by pushing down on black button while sliding out.

    • Realign all surface and put device back together making sure all parts are lined up and heating surfaces are making contact.

    • The aligned parts will allow the cooking surfaces to work properly.

  7. Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.
    • Remove the two 6 mm Phillips #2 screws that secure the knob circuit board.

    • Move the circuit board to the side so it is out of the way.

  8. Remove the two 6 mm Phillips #2 screws that secure the white plastic LED holder.
    • Remove the two 6 mm Phillips #2 screws that secure the white plastic LED holder.

  9. Pinch back plastic arms on knob while pulling out the knob.
    • Pinch back plastic arms on knob while pulling out the knob.

  10. Pop the new knob back into the hole and the repair is complete.
    • Pop the new knob back into the hole and the repair is complete.

결론

To reassemble your device, follow these instructions in reverse order.

Kayla Londono

회원 가입일: 2016년 04월 15일

560 평판

안내서 4개 작성하였습니다

Cal Poly, Team 1-12, Maness Spring 2016 Cal Poly, Team 1-12, Maness Spring 2016 회원

CPSU-MANESS-S16S1G12

4 회원들

안내서 6개 작성하였습니다

Where do you find the replacement knobs?

Chris Reece - 답글

im in same boat can't find the dials/knobs- 2 of mine are broken and useless

Mark Stevens - 답글

Cuisinart offers NO help. I will have to toss out a $100.00 unit over a $2.00 part.

Nick - 답글

I have several cuisinart appliances. I won't ever buy another. I need one replacement knob, the best they can do is 20 percent off on a new griddler . I can get that from bed bath and beyond. Thanks cuisinart, finding new brands. Cuisinart is dead to me.

allen brathwaite - 답글

Same here 2 knobs broken in 2 years and no way to find a new one

benoitcerrina - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 29

지난 30일: 110

전체 시간: 3,486