주요 콘텐츠로 건너뛰기

DBPOWER T20 Speaker Replacement

필요한 것

  1. DBPOWER T20 Speaker Replacement, DBPOWER T20 Disassembly: 1 단계, 이미지 1/1
    • Flip the device and lay flat.

  2. DBPOWER T20 Speaker Replacement: 2 단계, 이미지 1/1
    • Remove the four (9 mm) screws with a PH2 screwdriver.

    • Remove the two (7 mm) located with a PH2 screwdriver.

  3. DBPOWER T20 Speaker Replacement: 3 단계, 이미지 1/3 DBPOWER T20 Speaker Replacement: 3 단계, 이미지 2/3 DBPOWER T20 Speaker Replacement: 3 단계, 이미지 3/3
    • Flip the device over and pry the top off with a plastic opening tool.

  4. DBPOWER T20 Speaker Replacement: 4 단계, 이미지 1/1
    • Remove the ribbon cable connecting the motherboard to the button control board by gently pulling it from its connector.

  5. DBPOWER T20 Speaker Replacement: 5 단계, 이미지 1/2 DBPOWER T20 Speaker Replacement: 5 단계, 이미지 2/2
    • Remove four (6 mm) screws connecting the motherboard using a J0 screwdriver.

  6. DBPOWER T20 Speaker Replacement: 6 단계, 이미지 1/3 DBPOWER T20 Speaker Replacement: 6 단계, 이미지 2/3 DBPOWER T20 Speaker Replacement: 6 단계, 이미지 3/3
    • Remove the two cables connected to the motherboard: black power cable and the red/black fan cable.

    • the black cable requires more force to remove than the other cables.

  7. DBPOWER T20 Speaker Replacement: 7 단계, 이미지 1/2 DBPOWER T20 Speaker Replacement: 7 단계, 이미지 2/2
    • Lift the black latch on the ZIF connector and remove the ribbon cable that attaches the digitizer to the motherboard.

  8. DBPOWER T20 Speaker Replacement: 8 단계, 이미지 1/1
    • Raise motherboard by lifting sideways and then up to avoid the ports.

  9. DBPOWER T20 Speaker Replacement: 9 단계, 이미지 1/2 DBPOWER T20 Speaker Replacement: 9 단계, 이미지 2/2
    • Remove wires attaching the piezoelectric speakers to the motherboard.

  10. DBPOWER T20 Speaker Replacement: 10 단계, 이미지 1/2 DBPOWER T20 Speaker Replacement: 10 단계, 이미지 2/2
    • Remove the five screws securing the black plastic cover with a J0 screwdriver.

    • Lift up and out to remove.

  11. DBPOWER T20 Speaker Replacement, Speaker: 11 단계, 이미지 1/2 DBPOWER T20 Speaker Replacement, Speaker: 11 단계, 이미지 2/2
    • Remove the two (3 mm) screws connecting the bracket down and pull out the reflector, using a J0 Philips Head Screwdriver.

  12. DBPOWER T20 Speaker Replacement: 12 단계, 이미지 1/3 DBPOWER T20 Speaker Replacement: 12 단계, 이미지 2/3 DBPOWER T20 Speaker Replacement: 12 단계, 이미지 3/3
    • Slide the mirror straight up to remove.

  13. DBPOWER T20 Speaker Replacement: 13 단계, 이미지 1/3 DBPOWER T20 Speaker Replacement: 13 단계, 이미지 2/3 DBPOWER T20 Speaker Replacement: 13 단계, 이미지 3/3
    • Slide out the power source and disconnect its cables from the power jack and the light.

  14. DBPOWER T20 Speaker Replacement: 14 단계, 이미지 1/3 DBPOWER T20 Speaker Replacement: 14 단계, 이미지 2/3 DBPOWER T20 Speaker Replacement: 14 단계, 이미지 3/3
    • Remove the screws holding down the first speaker with a J0 screwdriver.

    • Remove the screws holding down the second speaker down.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Ryan Goldin

회원 가입일: 02/15/18

245 평판

안내서 1개 작성함

USF Tampa, Team S16-G2, Boczar Spring 2018 USF Tampa, Team S16-G2, Boczar Spring 2018 회원

USFT-BOCZAR-S18S16G2

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 7

30일 전: 15

전체 시간: 437