소개
Hi everyone. In this video tutorial, I'll show you how to calibrate the gimbal camera on a DJI Mavic 3 drone.
After replacing the motherboard or gimbal camera, you need to calibrate the drone. How to calibrate the DJI Mavic 3, watch this manual.
동영상 개요
-
-
Download Programs for Calibration Gimbal Python: https://www.python.org/
-
PySerial: https://pypi.org/project/pyserial/#files
-
7-zip: https://7-zip.org/
-
-
-
-
First script to run calibration
-
py comm_og_service_tool.py --port com pcode GimbalCalib JointCoarse
-
-
-
Second gimbal calibration script
-
py comm_og_service_tool.py --port com pcode GimbalCalib LinearHall
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 3명이 해당 안내서를 완성하였습니다.
댓글 17개
pour le mavic 3 wm260 impossible de trouvez le --port com ne marche pas.
If your PC does not detect your drone in the device manager, most likely your PC did not find drivers for your drone, download and install DJI Assistant for your drone model.
Arty -
Will this work on the Mavic 3?
Good Video but on Mavic 3 port com doesn't displayed even when DJI Assistant 2 for Mavic 3 is installed
Waiting for software update
Arty -
