기기를 수리하세요 커뮤니티 상점

DeWALT Hammer Drill DW511 Back Cover Replacement

소개

Removing the back cover of the DeWALT DW511 Hammer Drill allows for access to the internals of the device. This requires removing three screws and using an opening tool to pop off the back cover. Before beginning, make sure the drill is unplugged to avoid damaging components.

필요한 것

  1. DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: 1 단계, 이미지 1/3 DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: 1 단계, 이미지 2/3 DeWALT Hammer Drill DW511 Back Cover Replacement, Back Cover: 1 단계, 이미지 3/3

    • Remove three 19 mm T20 Torx screws from the back of the drill.

    편집

  3. DeWALT Hammer Drill DW511 Back Cover Replacement: 2 단계, 이미지 1/3 DeWALT Hammer Drill DW511 Back Cover Replacement: 2 단계, 이미지 2/3 DeWALT Hammer Drill DW511 Back Cover Replacement: 2 단계, 이미지 3/3

    • Place an opening tool in the groove line of the handle and pop the back loose.

    • Grab the drill with two hands and pull the cover off.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Kristen Gismondi

회원 가입일: 11/12/14

83,527 평판

안내서 205개 작성하였습니다

배지: 46

배지 +43개 더

팀

iFixit iFixit 회원

Staff

138 회원들

안내서 17,678개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 143