기기를 수리하세요 커뮤니티 상점

DeWalt D26451 Power Cord Replacement

소개

The power cord is the DeWalt D26451's source of energy. It is made for double insulated tools. It is a two-wire cord with two prongs and does not need a ground wire.

The power cord may become ripped or damaged and need to be replaced. In this repair guide we will be teaching you how to replace the cord. You can purchase a replacement power cord here.

필요한 것

  1. DeWalt D26451 Power Cord Replacement, Power Cord: 1 단계, 이미지 1/1

    • Please wear safety glasses while completing this guide.

    • Remove screws (3) from cap by using the T20 torx attachment and unscrewing in a leftward motion.

    번역하기

  2. DeWalt D26451 Power Cord Replacement: 2 단계, 이미지 1/1

    • Gently pry the cap off using your fingers or spudger tool.

    번역하기

  4. DeWalt D26451 Power Cord Replacement: 3 단계, 이미지 1/1

    • Once cap is off, expose and locate the power cord mounting bracket and remove the 2 screws holding the wire down by using the T15 torx attachment. Once the cord is loose, pull the connectors out

    번역하기

  5. DeWalt D26451 Power Cord Replacement: 4 단계, 이미지 1/1

    • Loosen the white and black wire terminals

    번역하기

  6. DeWalt D26451 Power Cord Replacement: 5 단계, 이미지 1/1

    • Insert new power cord terminals and tighten down

    • Do not over-tighten

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Shelby LeQuire

회원 가입일: 01/29/16

639 평판

안내서 5개 작성하였습니다

배지: 13

배지 +10개 더

팀

Western Carolina University, Team 1-2, Virtue Spring 2016 Western Carolina University, Team 1-2, Virtue Spring 2016 회원

WCU-VIRTUE-S16S1G2

6 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 14

전체 시간: 1,315