기기를 수리하세요 커뮤니티 상점

DeWalt DC970 Battery Cells Replacement

소개

If the battery of your drill is not giving the drill power, a problem you could have is deteriorated battery cells. This guide will show you how to replace the battery cells.

필요한 것

  1. DeWalt DC970 Battery Cells Replacement, Battery: 1 단계, 이미지 1/1

    • Compress the buttons on either side of the battery and lift the drill away from battery.

    편집

  2. DeWalt DC970 Battery Cells Replacement: 2 단계, 이미지 1/1

    • Remove battery from drill.

    편집

  4. DeWalt DC970 Battery Cells Replacement, Battery Cells: 3 단계, 이미지 1/2 DeWalt DC970 Battery Cells Replacement, Battery Cells: 3 단계, 이미지 2/2

    • Remove the six 19 mm, Torx Security 15 screws from the top of the battery.

    편집

  5. DeWalt DC970 Battery Cells Replacement: 4 단계, 이미지 1/1

    • Pull off the battery cover, exposing the battery cells.

    • Be careful to not damage the batteries, if damaged they may explode.

    편집

  6. DeWalt DC970 Battery Cells Replacement: 5 단계, 이미지 1/3 DeWalt DC970 Battery Cells Replacement: 5 단계, 이미지 2/3 DeWalt DC970 Battery Cells Replacement: 5 단계, 이미지 3/3

    • Remove the old battery cells by slowly pulling them out of the top piece of the battery.

    • The best is to recycle the old battery cells.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Jonathan Hamel

회원 가입일: 03/10/16

621 평판

안내서 4개 작성하였습니다

배지: 15

배지 +12개 더

팀

UMass Dartmouth, Team 4-2, Catania Spring 2016 UMass Dartmouth, Team 4-2, Catania Spring 2016 회원

UMASSD-CATANIA-S16S4G2

3 회원들

안내서 13개 작성하였습니다

댓글 2개

It is not clear from the guide if it is all cells that are replaced or single cells.

If single cells, it would be very nice if instructions were shown how to test each cell, and replace single cells.

/Søren

Andersen - 답글

Where can one get the replacement cells?

Samuel Harley - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 9

30일 전: 53

전체 시간: 4,079