주요 콘텐츠로 건너뛰기

DeWalt DCF885 Selector Switch Replacement

필요한 것

  1. DeWalt DCF885 Selector Switch Replacement, Battery: 1 단계, 이미지 1/1
    • Press the battery release button at the top of the battery.

  2. DeWalt DCF885 Selector Switch Replacement: 2 단계, 이미지 1/1
    • Pull the battery away from the tool.

  3. DeWalt DCF885 Selector Switch Replacement, Motor Assembly: 3 단계, 이미지 1/1
    • Remove the eight 18 mm Torx Security #10 screws.

  4. DeWalt DCF885 Selector Switch Replacement: 4 단계, 이미지 1/1
    • Separate the two halves of the outer case. Set the empty side down and out of the way.

  5. DeWalt DCF885 Selector Switch Replacement: 5 단계, 이미지 1/1
    • Disconnect the connector from the motor assembly.

  6. DeWalt DCF885 Selector Switch Replacement: 6 단계, 이미지 1/1
    • Pull the motor away from the brush assembly.

  7. DeWalt DCF885 Selector Switch Replacement, Brush Assembly: 7 단계, 이미지 1/1
    • Lift the brush assembly out of the drill case.

  8. DeWalt DCF885 Selector Switch Replacement: 8 단계, 이미지 1/1
    • Pull the armature assembly apart from the brush ring assembly.

  9. DeWalt DCF885 Selector Switch Replacement: 9 단계, 이미지 1/1
    • Pry the two circled connectors apart from the brush ring assembly.

  10. DeWalt DCF885 Selector Switch Replacement: 10 단계, 이미지 1/1
    • The brush assembly is now removed from the drill body.

  11. DeWalt DCF885 Selector Switch Replacement, Switch Assembly: 11 단계, 이미지 1/1
    • Pull the switch assembly up and out of the drill case.

  12. DeWalt DCF885 Selector Switch Replacement, Selector Switch: 12 단계, 이미지 1/1
    • Pull the selector switch out from the outer case.

결론

To reassemble your device, follow these instructions in reverse order.

Brittney Dismuke

회원 가입일: 01/17/19

166 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 21

전체 시간: 667