주요 콘텐츠로 건너뛰기

DeWalt DCS380 Blade Shaft Replacement

필요한 것

  1. DeWalt DCS380 Blade Shaft Replacement, Removing shoe and boot.: 1 단계, 이미지 1/1
    • Remove the battery before disassembly.

    • Remove the shoe by pressing the yellow button on the left side of the hand grip.

  2. DeWalt DCS380 Blade Shaft Replacement: 2 단계, 이미지 1/2 DeWalt DCS380 Blade Shaft Replacement: 2 단계, 이미지 2/2
    • Remove the two M8x18mm T20 bolts from the front plate.

  3. DeWalt DCS380 Blade Shaft Replacement: 3 단계, 이미지 1/1
    • Pull the front of the grip while holding the saw body in place.

  4. DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 4 단계, 이미지 1/2 DeWalt DCS380 Blade Shaft Replacement, Blade Shaft: 4 단계, 이미지 2/2
    • Remove the four M8x18mm T20 screws on the top of the gearbox.

    • Pull the top of the gearbox off and set the saw body aside.

  5. DeWalt DCS380 Blade Shaft Replacement: 5 단계, 이미지 1/2 DeWalt DCS380 Blade Shaft Replacement: 5 단계, 이미지 2/2
    • Remove the black plastic dust covers using the plastic pry bar.

    • Remove the two M5 lock nuts using a 5/16" socket.

  6. DeWalt DCS380 Blade Shaft Replacement: 6 단계, 이미지 1/2 DeWalt DCS380 Blade Shaft Replacement: 6 단계, 이미지 2/2
    • Turn the housing over and remove the two countersunk M5x17mm T20 bolts from the shaft yoke.

    • Remove the yoke.

  7. DeWalt DCS380 Blade Shaft Replacement: 7 단계, 이미지 1/2 DeWalt DCS380 Blade Shaft Replacement: 7 단계, 이미지 2/2
    • Pull the shaft out of the front of the housing.

    • Leave the shaft saddle in place over the holes in the cover.

    • Re-grease before re-assembly. If there are metal shavings or pieces of the broken shaft left in the gearbox make sure to remove them before re-greasing.

결론

To reassemble your device, follow these instructions in reverse order.

Jonathan Hicks

회원 가입일: 01/17/19

725 평판

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 10

30일 전: 18

전체 시간: 846