기기를 수리하세요 커뮤니티 상점

DeWalt DCS380 Grip Disassembly

소개

This guide will show how to disassemble the grip for replacing the trigger or motor armature.

필요한 것

  1. DeWalt DCS380 Grip Disassembly, DeWalt DCS380 Grip Disassembly: 1 단계, 이미지 1/2 DeWalt DCS380 Grip Disassembly, DeWalt DCS380 Grip Disassembly: 1 단계, 이미지 2/2

    • Remove the battery before dissasembly.

    • Remove the M3x16mm T10 screw from the back of the grip. Keep it separate from the rest of the grip screws

    • Remove the six M3.63x19 T15 screws from the grip.

    편집

  3. DeWalt DCS380 Grip Disassembly: 2 단계, 이미지 1/3 DeWalt DCS380 Grip Disassembly: 2 단계, 이미지 2/3 DeWalt DCS380 Grip Disassembly: 2 단계, 이미지 3/3

    • Remove the top half of the grip.

    • Turn the saw over and locate the power connectors to the motor.

    • Use needle nose pliers to remove the spade connectors. Take care not to grab the wires on removal, only the end of the spade terminal.

    • Note the polarity for the power connectors and be sure they are not reversed on reassembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Jonathan Hicks

회원 가입일: 01/17/19

725 평판

안내서 7개 작성하였습니다

배지: 5

배지 +2개 더

팀

Eastern Washington University, Team S2-G5, Munoz Winter 2019 Eastern Washington University, Team S2-G5, Munoz Winter 2019 회원

EWU-MUNOZ-W19S2G5

3 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 11

전체 시간: 361