주요 콘텐츠로 건너뛰기

DeWalt DW235G Drill Power Cord Replacement

필요한 것

  1. DeWalt DW235G Drill Power Cord Replacement, Handle Cover: 1 단계, 이미지 1/1
    • Remove the three screws with a Tr20 hex bit screwdriver.

    • Remove the back cover.

  2. DeWalt DW235G Drill Power Cord Replacement, Power Cord: 2 단계, 이미지 1/1
    • Unscrew the Tr20 Hex Screw connecting the green wire to the power cord.

    • Ensure the power drill is unplugged before disconnecting wires.

  3. DeWalt DW235G Drill Power Cord Replacement: 3 단계, 이미지 1/2 DeWalt DW235G Drill Power Cord Replacement: 3 단계, 이미지 2/2
    • Disconnect all the wires connected from the trigger box and power cord to the drill motor by pulling on the connectors.

    • There will be 5 wires to disconnect: 2 black, a white, a red, and a blue wire. Remember the locations of where they were connected so you can reconnect them later.

  4. DeWalt DW235G Drill Power Cord Replacement: 4 단계, 이미지 1/1
    • Remove the trigger box and power cord from the main chassis.

  5. DeWalt DW235G Drill Power Cord Replacement: 5 단계, 이미지 1/1
    • Disconnect the wires connecting the power cord to the trigger box by pressing on the clips with a spudger tool.

    • There will be 3 wires to disconnect: A black, white, and green wire. Remember what color attaches to each connector on the trigger box.

    • For reassembly, insert the wires back into the trigger box until a click is heard.

결론

The power cord will now be disconnect and you can replace it with a new one.

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

rpittana

회원 가입일: 09/12/23

248 평판

안내서 2개 작성하였습니다

University of North Texas, Team 3-6, Coppersmith Fall 2023 University of North Texas, Team 3-6, Coppersmith Fall 2023 회원

UNT-COPPERSMITH-F23S3G6

4 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 15

30일 전: 79

전체 시간: 279