기기를 수리하세요 커뮤니티 상점

DeWalt DW920 Lock Switch Replacement

필요한 것

  1. DeWalt DW920 Lock Switch Replacement, Disassembly: 1 단계, 이미지 1/1

    • Using an H-5.0 bit driver remove the four T-10 Torx screws.

    편집

  2. DeWalt DW920 Lock Switch Replacement: 2 단계, 이미지 1/1

    • Use 2 H-5.0 bit drivers to take out the main bolt and head.

    • There will be blue locktite on the tread.

    편집

  4. DeWalt DW920 Lock Switch Replacement: 3 단계, 이미지 1/1

    • Carefully remove the two halves of the handle.

    편집

  5. DeWalt DW920 Lock Switch Replacement, Lock Switch: 4 단계, 이미지 1/1

    • Locate the switch on the top of the drill right before the bending joint.

    편집

  6. DeWalt DW920 Lock Switch Replacement: 5 단계, 이미지 1/2 DeWalt DW920 Lock Switch Replacement: 5 단계, 이미지 2/2

    • Firmly grasp the switch with two fingers and lift it straight up. The spring should remain attached to the switch during this process.

    • It should lift right out. If it is caught on anything do not force it out.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Stephen Rada

회원 가입일: 03/11/16

433 평판

안내서 4개 작성하였습니다

배지: 9

배지 +6개 더

팀

UMass Dartmouth, Team 8-2, Botvin Spring 2016 UMass Dartmouth, Team 8-2, Botvin Spring 2016 회원

UMASSD-BOTVIN-S16S8G2

2 회원들

안내서 6개 작성하였습니다

댓글 한 개

This guide was descriptive and easy to follow. Good job!

DankMemerino - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 260