1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

    • Use a plastic opening tool to remove the cover from the computer.

    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

    • Remove the hard drive cable from the battery.

    • Lift the battery from the keyboard.

    • Disconnect power and volume buttons board cable from the system board.

    • Remove the power and volume buttons board cable from the routing guides on the speaker.

결론

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

회원 가입일: 2018년 10월 09일

1,051 평판

안내서 5개 작성하였습니다

USF Tampa, Team S1-G6, Leahy Fall 2018 USF Tampa, Team S1-G6, Leahy Fall 2018 회원

USFT-LEAHY-F18S1G6

3 회원들

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 25

전체 시간: 33