주요 콘텐츠로 건너뛰기
  1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

  3. Use a plastic opening tool to remove the cover from the computer.
    • Use a plastic opening tool to remove the cover from the computer.

  4. Remove the three 4.7mm PH0 screws that secure the battery to the computer.
    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

  5. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  6. Remove the hard drive cable from the battery.
    • Remove the hard drive cable from the battery.

  7. Lift the battery from the keyboard.
    • Lift the battery from the keyboard.

  8. Disconnect fan cable with tweezers.
    • Disconnect fan cable with tweezers.

  9. Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.
    • Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.

  10. Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.
    • Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.

  11. Remove the processor fan and heat sink assembly.
    • Remove the processor fan and heat sink assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

회원 가입일: 2018년 10월 09일

1,051 평판

안내서 5개 작성하였습니다

USF Tampa, Team S1-G6, Leahy Fall 2018 USF Tampa, Team S1-G6, Leahy Fall 2018 회원

USFT-LEAHY-F18S1G6

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 52