주요 콘텐츠로 건너뛰기
  1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

  3. Use a plastic opening tool to remove the cover from the computer.
    • Use a plastic opening tool to remove the cover from the computer.

  4. Remove the three 4.7mm PH0 screws that secure the battery to the computer.
    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

  5. Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기

    Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기
  6. Remove the hard drive cable from the battery.
    • Remove the hard drive cable from the battery.

  7. Lift the battery from the keyboard.
    • Lift the battery from the keyboard.

  8. Disconnect fan cable with tweezers.
    • Disconnect fan cable with tweezers.

  9. Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.
    • Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.

  10. Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.
    • Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.

  11. Remove the processor fan and heat sink assembly.
    • Remove the processor fan and heat sink assembly.

결론

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

회원 가입일: 2018년 10월 09일

1,051 평판

안내서 5개 작성하였습니다

USF Tampa, Team S1-G6, Leahy Fall 2018 USF Tampa, Team S1-G6, Leahy Fall 2018 회원

USFT-LEAHY-F18S1G6

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 52