소개

This guide shows how to remove the LCD assembly from a Dell Inspiron 15-7547

부품

부품은 필요하지 않습니다.

  1. Close the display and flip the laptop on its back.
    • Close the display and flip the laptop on its back.

    • Loosen the ten 5.0 mm-long Phillips #0 screws.

      • The four screws marked with orange will remain captive to the cover.

  2. Pry the cover open with a plastic spudger   and remove it.
    • Pry the cover open with a plastic spudger and remove it.

    • Remove the 3.0 mm-long Philips #0 screw at the end of the Wifi-Card

    • Remove the Wifi-Card from its socket by pulling away and up from the connector.

    • Disconnect the white and black cables from the Wifi-Card.

      • Make a note of which wire goes where for reconnecting them to the replacement card.

    • Remove the six 7.0 mm-long Philips #0 screws that mount the hinges.

    • Use a spudger to unlatch and unplug the display cable.

      • There will be a notch on the side of the connector.

    • Raise the left and right hinges.

    • Remove the LCD display assembly from the laptop.

결론

To reassemble your device, follow these instructions in reverse order.

Kevin Smith

회원 가입일: 2018년 09월 10일

303 평판

안내서 2개 작성하였습니다

조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 39

전체 시간: 80