주요 콘텐츠로 건너뛰기

소개

The heat sink is an essential piece of hardware in any computer. It is responsible for maintaining the proper operating temperature for the system. This allows for an increased life span and increased performance. In this guide, we will show you how to replace the heat sink in the Dell Inspiron 1526 laptop.

  1. Slide the unlock button to the left to release the battery. Slide the battery away from the laptop to remove. The unlock button is located on the bottom of the laptop.
    • Slide the unlock button to the left to release the battery.

    • Slide the battery away from the laptop to remove.

    • The unlock button is located on the bottom of the laptop.

  2. Use a Phillips #0 screwdriver to remove the eight 3mm screws from the rear casing of the laptop. Use a Phillips #0 screwdriver to remove the eight 3mm screws from the rear casing of the laptop.
    • Use a Phillips #0 screwdriver to remove the eight 3mm screws from the rear casing of the laptop.

  3. Loosen the five captive Phillips #0 screws from the heat sink. Lift the heat sink from the motherboard.
    • Loosen the five captive Phillips #0 screws from the heat sink.

    • Lift the heat sink from the motherboard.

  4. Apply a pea-sized amount of new thermal paste to the CPU and GPU. Apply a pea-sized amount of new thermal paste to the CPU and GPU.
    • Apply a pea-sized amount of new thermal paste to the CPU and GPU.

결론

To reassemble your device, follow these instructions in reverse order.

Caleb Mink

회원 가입일: 2019년 09월 17일

147 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 61