소개

How to remove and replace the hard-drive

    • Lift the latch and disconnect the hard-drive cable from the system board.

    • Remove the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Lift the hard-drive assembly from the palm rest and keyboard assembly.

    • Remove the screws that secure the hard-drive bracket to the hard drive.

  1. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
    • Lift the hard drive from the hard-drive bracket.

    • Disconnect the interposer from the hard drive.

    • Connect the interposer to the hard drive.

    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

    • Replace the screws that secure the hard-drive bracket to the hard drive.

    • Place the hard-drive assembly on the palm rest and keyboard assembly and align the screw holes on the hard-drive assembly with the screw holes on the palm rest and keyboard assembly

    • Replace the screws that secure the hard-drive assembly to the palm rest and keyboard assembly.

    • Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.

결론

To reassemble your device, follow these instructions in reverse order.

darrius

회원 가입일: 2018년 03월 26일

5,072 평판

안내서 30개 작성하였습니다

Informative Technologies Inc. Informative Technologies Inc. 회원

Community

15 회원들

안내서 925개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 9

전체 시간: 40