소개

Use this guide to remove the back panel in order to access internal components or replace the panel.

부품

부품은 필요하지 않습니다.

  1. Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you. Flip the device over so the backside is facing you.
    • Ensure the device is powered off and unplugged. Close the device and orient it face up, with the hinges further away from you.

    • Flip the device over so the backside is facing you.

  2. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  3. Using the Phillips #1 screwdriver, remove all nine 7mm screws.
    • Using the Phillips #1 screwdriver, remove all nine 7mm screws.

  4. Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device. Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.
    • Using the plastic opening tool, pull the back panel upward. Move the opening tool along the edge of the device and lift the panel off of your device.

    • Be aware, the back panel is kept in place by magnetic clips. They will offer some resistance, but continue to gently leverage upwards.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Christopher Gravelle

회원 가입일: 2018년 10월 23일

706 평판

안내서 7개 작성하였습니다

UMass Dartmouth, Team S1-G2, Simcock Fall 2018 UMass Dartmouth, Team S1-G2, Simcock Fall 2018 회원

UMASSD-SIMCOCK-F18S1G2

3 회원들

안내서 7개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 52