주요 콘텐츠로 건너뛰기
  1. Locate the release tabs located on either side of the battery, on the bottom of the laptop
    • Locate the release tabs located on either side of the battery, on the bottom of the laptop

    • Push the release tabs toward the center of the device.

    • Remove the battery.

  2. Remove the two countersunk keyboard screws using the Phillips #00 screwdriver
    • Remove the two countersunk keyboard screws using the Phillips #00 screwdriver

    • Battery removal is not necessary for keyboard removal.

  3. Lift up the keyboard using your fingers or a plastic opening tool
    • Lift up the keyboard using your fingers or a plastic opening tool

    • Do not not tear the ribbon cable hidden behind the keyboard

    • Disconnect the cable by sliding the connector ears outward

  4. After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing
    • After removing the keyboard, use the plastic opening tools or other form of leverage to remove the rest of the silver casing

    • Depending on your model, there could still be some hidden screws on the bottom case of the laptop that hold the palm-rest in place.

  5. Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.
    • Use a plastic opening tool to pry the silver portion front of the top away from the colored portion.

  6. There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.
    • There should be two small screws to the bottom corners of the speaker assembly, which can be found below the screen. Unscrew them.

    • NOTE: Keep track of where you put the screws after you remove them. Keep screws of the same size together and away from screws of different sizes.

  7. There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.
    • There should be a cable coming off the speakers that connects to the base below the keyboard. It should easily slide out from here. Congratulations! You have successfully removed the speakers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Kyle Beekman

회원 가입일: 2012년 04월 05일

144 평판

안내서 6개 작성하였습니다

Cal Poly, Team 14-10, Forte Spring 2012 Cal Poly, Team 14-10, Forte Spring 2012 회원

CPSU-FORTE-S12S14G10

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 2

전체 시간: 1,258