주요 콘텐츠로 건너뛰기

소개

This content will describe the procedure for replacing the WIFI Card.

부품

지정된 부품이 없습니다.

    • Flip the computer over and place it on a clean level surface.

    • Loosen the screws using a size #0 Phillips screwdriver.

    • The screws do not come completely out.

    • It is strongly recommended that the Anti-Static Wrist Strap is used to avoid damage to internal components.

  1. Once the screws are loose, open the panel using a plastic opening tool to access the components below. The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.
    • Once the screws are loose, open the panel using a plastic opening tool to access the components below.

    • The modem card should be labeled MODEM. The WIFI card is larger than the modem and closer to the outer edge of the computer.

  2. Gently pry up on the gold antennae connections  using a spudger. Gently pry open both retaining clips on either side of the WiFi card using a spudger.
    • Gently pry up on the gold antennae connections using a spudger.

    • Gently pry open both retaining clips on either side of the WiFi card using a spudger.

    • Once the clips are open and the card is unplugged, it is safe to remove.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Randy McMillan

회원 가입일: 2016년 09월 21일

738 평판

안내서 4개 작성하였습니다

Master Techs Master Techs 회원

Community

307 회원들

안내서 1,105개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 7

전체 시간: 310