주요 콘텐츠로 건너뛰기

소개

This guide is very important for other guides, as the battery must be removed before dealing with electronic connections within the computers encasement.

  1. Make sure that the computer is turned off and is disconnected from external power source.
    • Make sure that the computer is turned off and is disconnected from external power source.

    • Turn it upside down and locate the battery release switch.

    Introduction: Parts: Need to add the Fan Part Numbers

    Original equipment: CPU Fan DC28A000820, GPU Fan DC28A000920

    John Frazier - 답글

  2. While holding the switch in the open position, lift out the battery. If you plan to work on any internal laptop components, press and hold the power button for 5 seconds. This will dissipate any residual charge on the motherboard to prevent electrical shock when you begin to handle it.
    • While holding the switch in the open position, lift out the battery.

    • If you plan to work on any internal laptop components, press and hold the power button for 5 seconds. This will dissipate any residual charge on the motherboard to prevent electrical shock when you begin to handle it.

결론

To replace your battery, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Malik Shahbal

회원 가입일: 2010년 10월 05일

471 평판

안내서 5개 작성하였습니다

Cal Poly, Team 22-5, Maness Fall 2010 Cal Poly, Team 22-5, Maness Fall 2010 회원

CPSU-MANESS-F10S22G5

4 회원들

안내서 11개 작성하였습니다

I think it would be complete if we knew where to buy it as well.

Nobody would read up on changing a battery if he didn’t need one, so you might as well tell him where to get it.

I think that makes sense. However thank you for your effort.

kjanmunkedal - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 4,070