기기를 수리하세요 커뮤니티 상점

Dell Inspiron Mini 10 Palm Rest Bracket Replacement

소개

This guide will show you how to remove the palm rest bracket which holds the supports the hard drive bay and the palm rest. This part may need to be removed to access other components of the device including the motherboard and RAM module.

필요한 것

  1. Dell Inspiron Mini 10 Palm Rest Bracket Replacement, Battery: 1 단계, 이미지 1/1

    • To prevent injury and loss of data, ensure the device is turned off.

    • Slide the release latches out toward the edges to unlock the battery.

    번역하기

  2. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 2 단계, 이미지 1/1

    • Remove the battery by pulling it up and out.

    번역하기

  3. Dell Inspiron Mini 10 Palm Rest Bracket Replacement, Keyboard: 3 단계, 이미지 1/1

    • Remove the three 8mm Philips 0 screws securing the keyboard.

    번역하기

  4. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 4 단계, 이미지 1/1

    • Turn over the device and open the display.

    • Gently pry open the keyboard with the plastic opening tool, working under the edges to release the clips.

    번역하기

  6. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 5 단계, 이미지 1/2 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 5 단계, 이미지 2/2

    • Lift the keyboard off of the support bracket carefully since it is still connected by a ribbon cable.

    번역하기

  7. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 6 단계, 이미지 1/2 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 6 단계, 이미지 2/2

    • Push the clips out on either side of the ribbon cable to release it.

    • Gently disconnect the ribbon cable by pulling on the clear tab.

    • Remove the keyboard.

    번역하기

  8. Dell Inspiron Mini 10 Palm Rest Bracket Replacement, Palm Rest Bracket: 7 단계, 이미지 1/1

    • Close the device and turn over.

    • Remove the five 8mm Phillips 0 screws.

    번역하기

  9. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 8 단계, 이미지 1/2 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 8 단계, 이미지 2/2

    • Turn the device over and open the display.

    • Remove the single 8mm Phillips 0 screw attaching the hard-drive cage to the body of the device.

    번역하기

  10. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 9 단계, 이미지 1/2 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 9 단계, 이미지 2/2

    • Pull on the black tab and slide the hard-drive cage toward the USB port on the left side of the device until its comes free and carefully lift out of device.

    번역하기

  11. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 10 단계, 이미지 1/2 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 10 단계, 이미지 2/2

    • Remove the four 6mm Philips 0 screws securing the bracket.

    번역하기

  12. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 11 단계, 이미지 1/3 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 11 단계, 이미지 2/3 Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 11 단계, 이미지 3/3

    • Disconnect the following:

    • Power button cable

    • Speaker cable

    • Power status light cable

    • Bluetooth cable (if installed)

    번역하기

  13. Dell Inspiron Mini 10 Palm Rest Bracket Replacement: 12 단계, 이미지 1/1

    • Gently pry off the bracket using the prying tool.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Danielle Jarecki

회원 가입일: 10/21/16

334 평판

안내서 5개 작성하였습니다

배지: 14

배지 +11개 더

팀

UW Tacoma, Team 1-4, Rose Fall 2016 UW Tacoma, Team 1-4, Rose Fall 2016 회원

UWT-ROSE-F16S1G4

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 246