필요한 것
-
-
-
Remove the four screws (two on each side) that attach the hard drive cage to the hard drive.
-
Lift the hard drive cage off the hard drive.
Excellent guide, was a super easy swap. I put an SSD in it!!
Matt Yakel - 답글
Hey Just one question, is the HDD SATA 2 or SATA 3? Just wanted to know so I can purchase an SDD with the correct specification.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 35명이 해당 안내서를 완성하였습니다.
댓글 3개
Thanks for this info this is very useful
Thank you once again
Really useful information thank you.