주요 콘텐츠로 건너뛰기

Dell Latitude 9510 Fan Replacement

필요한 것

  1. Dell Latitude 9510 Fan Replacement, Base Panel: 1 단계, 이미지 1/1
    • Flip the device so that the base plate is facing you.

    • Use a Phillips #0 screwdriver to remove the nine 5.5 mm screws securing the base plate.

  2. Dell Latitude 9510 Fan Replacement: 2 단계, 이미지 1/1
    • Wedge a spudger between the base plate and the chassis, then gently pry around the entire perimeter to release the base plate.

    • Remove the base plate.

  3. Dell Latitude 9510 Fan Replacement, Speakers: 3 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the speakers.

  4. Dell Latitude 9510 Fan Replacement: 4 단계, 이미지 1/1
    • Use a spudger to gently lever the speaker connector out of its port.

    • Lift the speakers up and out.

  5. Dell Latitude 9510 Fan Replacement, Fan: 5 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the two 3 mm screws securing the fan.

  6. Dell Latitude 9510 Fan Replacement: 6 단계, 이미지 1/1
    • Place your fingernails behind the plastic tabs on the speaker's motherboard connector, then pull directly backwards, toward the wires, until the connector releases from its port.

    • Lift the fan up and out.

결론

To reassemble your device, follow these instructions in reverse order.

Adam Sholar

회원 가입일: 02/08/22

243 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 7

전체 시간: 146