주요 콘텐츠로 건너뛰기

Dell Latitude 9510 Motherboard Replacement

필요한 것

  1. Dell Latitude 9510 Motherboard Replacement, Base Panel: 1 단계, 이미지 1/1
    • Flip the device so that the base plate is facing you.

    • Use a Phillips #0 screwdriver to remove the nine 5.5 mm screws securing the base plate.

  2. Dell Latitude 9510 Motherboard Replacement: 2 단계, 이미지 1/1
    • Wedge a spudger between the base plate and the chassis, then gently pry around the entire perimeter to release the base plate.

    • Remove the base plate.

  3. Dell Latitude 9510 Motherboard Replacement, Speakers: 3 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the speakers.

  4. Dell Latitude 9510 Motherboard Replacement: 4 단계, 이미지 1/1
    • Use a spudger to gently lever the speaker connector out of its port.

    • Lift the speakers up and out.

  5. Dell Latitude 9510 Motherboard Replacement, Fan: 5 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the two 3 mm screws securing the fan.

  6. Dell Latitude 9510 Motherboard Replacement: 6 단계, 이미지 1/1
    • Place your fingernails behind the plastic tabs on the speaker's motherboard connector, then pull directly backwards, toward the wires, until the connector releases from its port.

    • Lift the fan up and out.

  7. Dell Latitude 9510 Motherboard Replacement, USB and Headphone Jack Replacement: 7 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the four 3.5 mm screws.

  8. Dell Latitude 9510 Motherboard Replacement: 8 단계, 이미지 1/1
    • Place your fingernails behind each of the plastic tabs on the plug, and pull directly backward until the connector releases.

  9. Dell Latitude 9510 Motherboard Replacement: 9 단계, 이미지 1/1
    • Flip up the locking bars on the two ZIF connectors so they stand vertically, then gently remove the two ribbon cables connected to the IO daughterboard.

    • Lift the IO daughterboard up and out.

  10. Dell Latitude 9510 Motherboard Replacement, Battery: 10 단계, 이미지 1/1
    • Use a Phillips #0 screwdriver to remove the eight screws securing the battery.

  11. Dell Latitude 9510 Motherboard Replacement: 11 단계, 이미지 1/1
    • Place a spudger behind a plastic tab on either side of the plug, then "walk" the connector out of its socket by gently pushing the plug toward the cables, alternating sides, until the connector releases.

    • Lift the battery up and out.

  12. Dell Latitude 9510 Motherboard Replacement, Motherboard: 12 단계, 이미지 1/2 Dell Latitude 9510 Motherboard Replacement, Motherboard: 12 단계, 이미지 2/2
    • Use a Phillips #00 screwdriver to remove the four screws.

    • Use a Phillips #00 screwdriver to remove the three screws.

  13. Dell Latitude 9510 Motherboard Replacement: 13 단계, 이미지 1/2 Dell Latitude 9510 Motherboard Replacement: 13 단계, 이미지 2/2
    • Flip up the small metal display cable clip, until the clip is parallel to the ribbon cable, then pull it directly backwards until it releases.

    • Flip up the lock-bar on the ZIF connector, then gently pull the ribbon cable until it releases.

    • This requires almost no force.

  14. Dell Latitude 9510 Motherboard Replacement: 14 단계, 이미지 1/2 Dell Latitude 9510 Motherboard Replacement: 14 단계, 이미지 2/2
    • Use a Phillips #00 screwdriver to remove the seven 4.0 mm screws.

    • Use a Phillips #00 screwdriver to remove the two 4.5mm screws.

  15. Dell Latitude 9510 Motherboard Replacement: 15 단계, 이미지 1/1
    • Lift the motherboard up and out.

결론

To reassemble your device, follow these instructions in reverse order.

Adam Sholar

회원 가입일: 02/08/22

243 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 7

30일 전: 11

전체 시간: 295