기기를 수리하세요 커뮤니티 상점

Dell Latitude E6510 Heat Sink Replacement

소개

This guide will show you the process of removing and replacing the heat sink system in your Latitude E6510.

필요한 것

  1. Dell Latitude E6510 Heat Sink Replacement, Heat Sink: 1 단계, 이미지 1/3 Dell Latitude E6510 Heat Sink Replacement, Heat Sink: 1 단계, 이미지 2/3 Dell Latitude E6510 Heat Sink Replacement, Heat Sink: 1 단계, 이미지 3/3

    • Locate the tabs that lock the battery in place.

    • Push tabs towards each other while simultaneously pushing the battery away from the device.

    편집

  2. Dell Latitude E6510 Heat Sink Replacement: 2 단계, 이미지 1/3 Dell Latitude E6510 Heat Sink Replacement: 2 단계, 이미지 2/3 Dell Latitude E6510 Heat Sink Replacement: 2 단계, 이미지 3/3

    • Unscrew the screw located in the center of the back panel. Do not completely remove the screw, a spring will keep it in place when it has been loosened.

    • Slide the panel back until it unlocks.

    편집

  4. Dell Latitude E6510 Heat Sink Replacement: 3 단계, 이미지 1/3 Dell Latitude E6510 Heat Sink Replacement: 3 단계, 이미지 2/3 Dell Latitude E6510 Heat Sink Replacement: 3 단계, 이미지 3/3

    • Locate the fan plug.

    • Pull up until it is unplugged from the reciever.

    • Take caution when unplugging the fan plug from the receiver.

    편집

  5. Dell Latitude E6510 Heat Sink Replacement: 4 단계, 이미지 1/3 Dell Latitude E6510 Heat Sink Replacement: 4 단계, 이미지 2/3 Dell Latitude E6510 Heat Sink Replacement: 4 단계, 이미지 3/3

    • Unscrew the two 5.5 mm screws securing the fan.

    • Lift the end of the fan opposite the copper wire up.

    • Pull the fan away from the device.

    편집

  6. Dell Latitude E6510 Heat Sink Replacement: 5 단계, 이미지 1/1

    • Locate and loosen the four silver screws holding down the heat redistribute component.

    • Do not competely remove the screws as springs keep the screws attached to the metal plate after you loosen them.

    편집

  7. Dell Latitude E6510 Heat Sink Replacement: 6 단계, 이미지 1/3 Dell Latitude E6510 Heat Sink Replacement: 6 단계, 이미지 2/3 Dell Latitude E6510 Heat Sink Replacement: 6 단계, 이미지 3/3

    • Lift the metal plate up on the end closest to the screws.

    • Slide the whole assembly away from where you removed the fan.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Noah

회원 가입일: 02/05/19

327 평판

안내서 2개 작성하였습니다

배지: 7

배지 +4개 더

팀

The Citadel Military College of South Carolina, Team S2-G2, Eggleston Spring 2019 The Citadel Military College of South Carolina, Team S2-G2, Eggleston Spring 2019 회원

CMCSC-EGGLESTON-S19S2G2

2 회원들

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 4

전체 시간: 919