부품

부품은 필요하지 않습니다.

Before removing the battery from the laptop, make sure the power is off.
  • Before removing the battery from the laptop, make sure the power is off.

  • Push both battery locking clips outward at the same time.

댓글 쓰기

Slide the battery out of the laptop.
  • Slide the battery out of the laptop.

댓글 쓰기

  • Remove the four 4-mm screws on the bottom of the laptop using a #0 screw driver.

댓글 쓰기

  • Carefully turn the laptop over and open the screen all the way.

  • Locate the slot to remove the keyboard in the lower left hand corner.

  • Using a spudger as a lever, insert it into the slot and gently pry up.

댓글 쓰기

  • After the keyboard pops up, pull it away from the screen just enough to release the tabs.

  • Don’t pull the keyboard out forcefully as there is still a ribbon attached to the laptop.

댓글 쓰기

  • Unlock the ZIF connector on the computer by pushing the two outside tabs toward the screen.

댓글 쓰기

  • Remove the flexible ribbon from ZIF connector.

  • Do not pull on the ribbon to remove it from the ZIF connector.

댓글 쓰기

  • Position the laptop so that the bottom is facing upward.

  • Remove the 3 #0 4 mm screws holding the bottom of the palm rest.

댓글 쓰기

  • Return the laptop to proper position and open the screen.

  • Remove the 6 #0 4 mm screws holding in the palm rest.

댓글 쓰기

  • Gently lift the palm rest and rotate it outward so that the bottom is now facing up.

  • The ribbon attached to the track is short and extremely delicate. Use care when moving the palm rest.

댓글 쓰기

  • Lift up on the small ZIF connector and remove ribbon.

  • If ribbon seems stuck gently wiggle it to remove. Do not pull ribbon with great force.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Thomas Wong

회원 가입일: 2012년 01월 20일

23 평판

안내서 2개 작성하였습니다

Cal Poly, Team 11-20, Maness Winter 2012 Cal Poly, Team 11-20, Maness Winter 2012 회원

CPSU-MANESS-W12S11G20

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 761