Turn the laptop over so that the bottom is facing up. Remove the two #0 3 mm screws holding the cover plate.
  • Turn the laptop over so that the bottom is facing up.

  • Remove the two #0 3 mm screws holding the cover plate.

댓글 쓰기

Push both metal retaining clips outward at the same time using your hands carefully.
  • Push both metal retaining clips outward at the same time using your hands carefully.

  • If done correctly the memory should pop up at a 45 degree angle.

댓글 쓰기

Gently pull the memory out of the retainer at the same 45 degree angle.
  • Gently pull the memory out of the retainer at the same 45 degree angle.

댓글 쓰기

Insert the new memory at 45 degree angle.
  • Insert the new memory at 45 degree angle.

댓글 쓰기

Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.
  • Ensure the memory is in all the way before pressing the memory downward until both metal retainer clips are snapped into place.

댓글 쓰기

결론

To reassemble your device, reinstall cover plate with two #0 screws.

Thomas Wong

회원 가입일: 2012년 01월 20일

23 평판

안내서 2개 작성하였습니다

Cal Poly, Team 11-20, Maness Winter 2012 Cal Poly, Team 11-20, Maness Winter 2012 회원

CPSU-MANESS-W12S11G20

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 7

전체 시간: 1,989