소개

Replace the Dead Battery on the Motherboard

부품

부품은 필요하지 않습니다.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

    댓글 쓰기

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    댓글 쓰기

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    댓글 쓰기

    • Unplug the blue cable that connects the hard drive to the motherboard.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Unplug the power supply, distinguished by its red and yellow wires (yellow wire obscured from view).

    댓글 쓰기

    • Squeeze the release tabs on either side of the hard drive.

    댓글 쓰기

    • Slide the Hard Drive out while squeezing the tabs.

    댓글 쓰기

    • Under the hard drive, there is a circular, silver battery connected to the motherboard.

    • Use a spudger to gently pry the battery from the motherboard.

    댓글 쓰기

    • Lift the battery out of the motherboard.

    댓글 쓰기

    • Upon replacement, simply push the battery into the motherboard.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 9명이 해당 안내서를 완성하였습니다.

Tom

회원 가입일: 2010년 10월 04일

799 평판

안내서 7개 작성하였습니다

Cal Poly, Team 22-4, Maness Fall 2010 Cal Poly, Team 22-4, Maness Fall 2010 회원

CPSU-MANESS-F10S22G4

4 회원들

안내서 13개 작성하였습니다

that particular battery holder looked hard to get out- no pop out lever, thought i’d break it gouging it out!

neverts “itchytastyurr” ennud - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 10

전체 시간: 10,959