주요 콘텐츠로 건너뛰기

Dell Studio 1435 Hard Drive Replacement

필요한 것

  1. Dell Studio 1435 Hard Drive Replacement, Battery: 1 단계, 이미지 1/1
    • Slide the battery release latch to the side.

    • Slide the battery out of the battery bay.

  2. Dell Studio 1435 Hard Drive Replacement, Base Cover: 2 단계, 이미지 1/1
    • Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

  3. Dell Studio 1435 Hard Drive Replacement, Hard Drive: 3 단계, 이미지 1/1
    • Remove the two screws on the hard drive assembly.

  4. Dell Studio 1435 Hard Drive Replacement: 4 단계, 이미지 1/1
    • Pull the pull tab to disconnect the hard drive assembly from the system board connector.

    • Pull the interposer to detach it from the hard drive.

    • Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.

    • Lift the hard drive cage off the hard drive.

결론

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

회원 가입일: 02/28/18

44,830 평판

안내서 408개 작성하였습니다

RampUP America, Inc. RampUP America, Inc. 회원

Community

42 회원들

안내서 1,985개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 3

전체 시간: 346