Skip to main content
  1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1]. Pry the base cover from the edge [2].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

  2. Disconnect the battery cable from the connector on the system board [1]. Remove the M2x3L screws that secure the battery to the computer [2].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Lift the latch and disconnect the hard drive cable from the computer [1].
    • Lift the latch and disconnect the hard drive cable from the computer [1].

    • Pry the hard drive cable to release from the adhesive [2].

  5. Remove the M2.5x5L screws that secure the hard drive to the computer [1].
    • Remove the M2.5x5L screws that secure the hard drive to the computer [1].

    • Lift the hard drive away from the computer [2].

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Johnathan Hammond

회원 가입일: 2018년 02월 28일

35,861 평판

안내서 408개 작성하였습니다

Informative Technologies Inc. Informative Technologies Inc. 회원

Community

15 회원들

안내서 930개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 4

전체 시간: 92