주요 콘텐츠로 건너뛰기

부품

지정된 부품이 없습니다.

  1. Pop the center cover open on the bottom cover.
    • Pop the center cover open on the bottom cover.

    • Remove the center screw with a #00 Phillips screwdriver.

    • Use a T5 Torx screwdriver for the remaining screws around the edge of the bottom cover.

  2. Carefully remove back panel after all screws have been  removed.
    • Carefully remove back panel after all screws have been removed.

  3. After the back panel has been removed, disconnect the battery to prevent electrical shock
    • After the back panel has been removed, disconnect the battery to prevent electrical shock

  4. Use a Phillips #00 screwdriver to remove the 8 screws that secure the battery.
    • Use a Phillips #00 screwdriver to remove the 8 screws that secure the battery.

  5. Once all the screws have been removed the battery is now safe to extract
    • Once all the screws have been removed the battery is now safe to extract

  6. Unplug the trackpad cable.
    • Unplug the trackpad cable.

  7. Insert wisdom here.
    • Insert wisdom here.

  8. Use a Phillips screwdriver to remove the 4 trackpad screws.
    • Use a Phillips screwdriver to remove the 4 trackpad screws.

  9. Remove the trackpad.
    • Remove the trackpad.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

DJ Jackson

회원 가입일: 2017년 04월 11일

384 평판

안내서 2개 작성하였습니다

University of Memphis, Team S1-G2, Kim Spring 2017 University of Memphis, Team S1-G2, Kim Spring 2017 회원

UM-KIM-S17S1G2

3 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 15

전체 시간: 1,222