Dell XPS 12 9Q33 mSATA Card Replacement - iFixit 수리 안내서

필요한 것

1 단계 Removing the Battery

Dell XPS 12 9Q33 mSATA Card Replacement, Removing the Battery: 1 단계, 이미지 1/1

Slide the battery cable connector out of its system board socket.
Pull parallel to the motherboard, not straight up, or you will damage the socket.
Remove the screws that secure the battery to the palm-rest assembly.
Lift and remove the battery along with its cable.
Slide and hold the power switch for about five seconds to ground the system board.

2 단계 Removing the mSATA card

Dell XPS 12 9Q33 mSATA Card Replacement, Removing the mSATA card: 2 단계, 이미지 1/1

Remove the screw that secures the mSATA card to the system board.
Slide and remove the mSATA card out of the mSATA-card connector.
If this is all you are doing Follow Step In Reverse if not Go to Next Step.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Johnathan Hammond

회원 가입일: 02/28/18

44,953 평판

안내서 408개 작성하였습니다

배지 +22개 더

팀

RampUP America, Inc. RampUP America, Inc. 회원

Community

42 회원들

안내서 1,985개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 4

30일 전: 5

전체 시간: 373