주요 콘텐츠로 건너뛰기

소개

if your laptop is overheating and you need to replace it. here are the steps that you should follow.

  1. Remove ten 3mm screws from the back cover with a T4 screwdriver. Remove ten 3mm screws from the back cover with a T4 screwdriver.
    • Remove ten 3mm screws from the back cover with a T4 screwdriver.

  2. Remove the ribbons from both sides with a plastic iFixit opening tool.
    • Remove the ribbons from both sides with a plastic iFixit opening tool.

  3. Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.
    • Use a PH1 screwdriver to remove the two 3mm screws that secure the fan.

  4. Use a plastic iFixit opening tool to remove the wire connected to the fan. Lift the fan up to remove.
    • Use a plastic iFixit opening tool to remove the wire connected to the fan.

    • Lift the fan up to remove.

결승점

Ahmad EL Herbawi

회원 가입일: 2017년 03월 01일

481 평판

안내서 3개 작성하였습니다

USF Tampa, Team S6-G3, Lacy Spring 2017 USF Tampa, Team S6-G3, Lacy Spring 2017 회원

USFT-LACY-S17S6G3

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 5

전체 시간: 991