주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

How to remove the base (bottom) cover and power light board, which must be removed to access the battery. The images and information in this guide were taken from this computer's service manual, which can be found on the product page.

부품

지정된 부품이 없습니다.

  1. After turning off the computer, use a Torx 5 screwdriver to remove the 10 screws (#2) from the computer's base.
    • After turning off the computer, use a Torx 5 screwdriver to remove the 10 screws (#2) from the computer's base.

    • Using a prying tool or a fingernail, lift up the base cover (#1).

  2. Lift up the small latch which holds down the power-light board cable (#3) down. Remove the cable by pulling out sideways.
    • Lift up the small latch which holds down the power-light board cable (#3) down. Remove the cable by pulling out sideways.

    • After removing the Philips screw which holds down the power-light board (#1), remove the power light board (#2) and its cable.

결론

To reassemble your device, follow these instructions in reverse order.

William Daniels

회원 가입일: 2018년 04월 06일

787 평판

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 276