주요 콘텐츠로 건너뛰기

소개

If your keyboard is unresponsive due to interior damage from liquids or dirt, or has been physically damaged, then use this guide to replace it. You will need a Phillips head #01 Screwdriver, a Flathead 3.0 Screwdriver, an iFixit opening tool, and tweezers. This process is a little more difficult than the previous, but you will have no problems in using this guide.

  1. Flip the laptop on its back, so that the underside is facing up.
    • Flip the laptop on its back, so that the underside is facing up.

  2. Push and hold the slide button to the left and unlock the mechanism.
    • Push and hold the slide button to the left and unlock the mechanism.

  3. Lift the computer up and slowly pull the battery straight out from the device. Lift the computer up and slowly pull the battery straight out from the device.
    • Lift the computer up and slowly pull the battery straight out from the device.

  4. Flip the laptop on its back, so that the underside is facing up
    • Flip the laptop on its back, so that the underside is facing up

  5. Remove the four 3.0mm Phillips #1 screws securing the hard drive casing.
    • Remove the four 3.0mm Phillips #1 screws securing the hard drive casing.

  6. Slide the hard drive away from the computer, slowly and carefully. Slide the hard drive away from the computer, slowly and carefully. Slide the hard drive away from the computer, slowly and carefully.
    • Slide the hard drive away from the computer, slowly and carefully.

  7. Remove the four 5.0mm screws with a Phillips #1 screwdriver. Remove the one external 5.0mm screw with a Phillips #1 screwdriver.
    • Remove the four 5.0mm screws with a Phillips #1 screwdriver.

    • Remove the one external 5.0mm screw with a Phillips #1 screwdriver.

    • Remove the fan cover.

  8. Remove the four 0.1mm screws using the Phillips #1 screwdriver.
    • Remove the four 0.1mm screws using the Phillips #1 screwdriver.

    • Remove the one thicker 0.1 mm screw using the Phillips #1 screwdriver.

  9. Be sure to carefully remove the wires as they are fragile and can rip easily.
    • Be sure to carefully remove the wires as they are fragile and can rip easily.

    • Remove the wire bay near the fan.

    • Use the long nosed tweezers to carefully handle the white plastic piece that holds the wires together.

    • Gently pull upward while moving your hand side to side so the plastic holder will detach.

  10. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  11. Gently remove the fan and its attachments from the bay.
    • Gently remove the fan and its attachments from the bay.

  12. Using the flathead screwdriver, turn the one screw counterclockwise to loosen the CPU, but do not remove the screw.
    • Using the flathead screwdriver, turn the one screw counterclockwise to loosen the CPU, but do not remove the screw.

  13. Using the iFixit opening tool, prop up the CPU.
    • Using the iFixit opening tool, prop up the CPU.

  14. Carefully lift the CPU away from its housing.
    • Carefully lift the CPU away from its housing.

  15. Unscrew the 5.0mm Phillips #1 screw from the wireless door cover.
    • Unscrew the 5.0mm Phillips #1 screw from the wireless door cover.

    • Pull straight up on the wireless door.

  16. Unscrew the 3.0mm Phillips #1 screw from the wireless card. Unscrew the 3.0mm Phillips #1 screw from the wireless card.
    • Unscrew the 3.0mm Phillips #1 screw from the wireless card.

  17. Slide the card to the left and up to remove it. Slide the card to the left and up to remove it. Slide the card to the left and up to remove it.
    • Slide the card to the left and up to remove it.

  18. Separate the two clips on both sides of the memory sticks. The memory stick will lift up. Gently pull the memory stick up and out of its holder.
    • Separate the two clips on both sides of the memory sticks.

    • The memory stick will lift up.

    • Gently pull the memory stick up and out of its holder.

    • Repeat these same steps for the second memory stick below.

  19. Remove the two 2.5mm Phillips #1 screws in the battery housing port.
    • Remove the two 2.5mm Phillips #1 screws in the battery housing port.

  20. Flip the laptop back over so the cover is on top.
    • Flip the laptop back over so the cover is on top.

  21. Carefully open the screen, so it is facing toward yourself. Flatten out the screen as much as possible.
    • Carefully open the screen, so it is facing toward yourself.

    • Flatten out the screen as much as possible.

  22. Carefully lift the computer, so you can get a good grip by the hinges. Carefully lift and remove the central control media button cover from the base.
    • Carefully lift the computer, so you can get a good grip by the hinges.

    • Carefully lift and remove the central control media button cover from the base.

    • This piece snaps out of its constraints. Be slow and controlled, so you don't break a snap. There is also a cable attached underneath.

  23. Use the Phillips #1 screwdriver to remove the two 3.0mm screws at the top of the keyboard.
    • Use the Phillips #1 screwdriver to remove the two 3.0mm screws at the top of the keyboard.

  24. When removing this piece lift slowly as there is a cord underneath that connects to the keyboard. Carefully lift the keyboard up and toward the front screen.
    • When removing this piece lift slowly as there is a cord underneath that connects to the keyboard.

    • Carefully lift the keyboard up and toward the front screen.

  25. Lift the keyboard latch toward yourself. Lift the keyboard latch toward yourself.
    • Lift the keyboard latch toward yourself.

  26. Gently pull the keyboard cable away from your body. Detach the keyboard cable.
    • Gently pull the keyboard cable away from your body.

    • Detach the keyboard cable.

결론

To reassemble your device, follow these instructions in reverse order.

Kai Kapossy

회원 가입일: 2019년 03월 24일

601 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team S6-G2, Peak Spring 2019 UMass Dartmouth, Team S6-G2, Peak Spring 2019 회원

UMASSD-PEAK-S19S6G2

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 9

전체 시간: 86