기기를 수리하세요 커뮤니티 상점

Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement

소개

This guide will take you through the steps of replacing the LED in your device.

필요한 것

  1. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement, Unplug: 1 단계, 이미지 1/1

    • Before you begin, remember to disconnect the mains plug.

    번역하기

  2. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 2 단계, 이미지 1/1

    • Remove the seal on the back of the device.

    번역하기

  3. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 3 단계, 이미지 1/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 3 단계, 이미지 2/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 3 단계, 이미지 3/3

    • Unscrew the first screw of the pad.

    • Then unscrew the four remaining screws and pull up to remove it.

    • Finally remove the screws located on the hull of the device.

    번역하기

    • This step is the same for both carbons.

    • Wedge the two carbons to be able to take out the rotor. Reassemble them with a screwdriver, then with another screwdriver press the tab.

    • Lift the carbon and with the other tip of the screwdriver, twist the small leg.

    • Then remove the carbon.

    번역하기

    • Remove the rotor by lifting the frame to be able to retrieve it more easily.

    번역하기

  7. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 6 단계, 이미지 1/1

    • Pull out the switch for more space.

    번역하기

    • Remove the LED from its housing using pliers

    번역하기

  9. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 8 단계, 이미지 1/2 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 8 단계, 이미지 2/2

    • Desolder the two black and red wires to be able to change the part.

    번역하기

  10. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 9 단계, 이미지 1/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 9 단계, 이미지 2/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 9 단계, 이미지 3/3

    • Resolder the new LED.

    • Then replace the LED in its housing, taking care to put the cables back in their path.

    번역하기

  11. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 10 단계, 이미지 1/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 10 단계, 이미지 2/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 10 단계, 이미지 3/3

    • Replace the switch, the rotor in its housing. and unlock the carbons.

    번역하기

  12. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 11 단계, 이미지 1/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 11 단계, 이미지 2/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 11 단계, 이미지 3/3

    • Replace the cable, the sheath must arrive between the two studs and the sleeve must be positioned in its housing.

    • Replace the shell of the sander, taking care to position the stabilizers correctly in their housings.

    • Finally remove the screws located on the hull of the device.

    번역하기

  13. Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 12 단계, 이미지 1/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 12 단계, 이미지 2/3 Dexter 220W Corded Multifunction Sander - 220MFS2.5 LED Replacement: 12 단계, 이미지 3/3

    • Replace the pad by positioning it perfectly in the tips.

    • Tighten the four screws.

    • Then the last screw. Finally put the gasket back in place.

    번역하기
결론

By the end of the guide you will have successfully replaced the LED.

To reassemble preform the steps in reverse.

다음 번역가들에게 특별히 감사 드립니다:

fr en

100%

HelloMacOS

HelloMacOS님은 저희가 세상을 수리하는데 동참하신 분입니다! 기여하시겠습니까?
번역 시작하기 ›

작성자

다른 기여자 1명과 함께

Céline Chemineau

회원 가입일: 01/29/20

16,581 평판

안내서 95개 작성하였습니다

배지: 12

배지 +9개 더

팀

Leroy Merlin Leroy Merlin 회원

Community

36 회원들

안내서 239개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 163